product reference catalogue
Service Guides | Select Chimney Switch Pack Replacement
Stacks Image 381
Step 1
  • • Ensure that the appliance is switched off and unplugged from the mains.
  • • Remove the grease filters from the bottom of the hood.

Step 2

  • • Disconnect the motor from the switch pack as shown


Stacks Image 403
Stacks Image 416
Step 3
  • • Remove the two screws holding the switch pack in place at the from of the hood.
  • • With these removed the switch pack will become free and can be removed easily from the inside of the hood.

Step 4

  • • Be careful not to damage the bulbs when you remove the switch pack as you will be able to use these in your new pack.

Stacks Image 433
Stacks Image 437
Step 5
  • • To install your new switch pack into the hood, follow the instructions above in reverse.

Bigblue Product Design Limited
1 Colchester House
The Square, Seller Street
Chester
CH1 3AP
United Kingdom

phone: 01244 402975